![]() Make sure that you place the pen as far as it can go by exerting enough pressure. To open the lock, insert the pen inside it. Step 3: Insert the tip of the pen inside the lock and shake until the lock opens Make sure that the notches are placed along the sides of the pen. This can be done by using a pair of scissors. To do this, you need to make four vertical notches at the back of the pen. The pen must be flexible enough while you are inserting it inside the tubular lock so that you can open the lock easily. Step 2: Make four vertical notches at the back of the pen If you are using a recyclable pen, just take off the cap at the end of the pen and pull out the ink tube from the inside. Once you are done, you can now remove the ink tube since you will be using the exterior of the pen to open the lock. Step 1: Cut the end of the ballpoint pen then remove the ink tubeįirst, you need to use a pair of scissors to cut the end of the ballpoint pen. How to Pick a Tubular Lock with a Ballpoint Pen Make sure that the pair of scissors you will use is sharp enough to cut the exterior of a ballpoint pen. Their handle is made of plastic to make handling and gripping comfortable. These are used for cutting papers, cardboard, and cards. If you don’t have industrial scissors, you can also use standard scissors. This is ideal for those who have arthritis or problems with their hands. They are typically used for cutting thick fabrics and upholstery. Compared to other types, these scissors have large blades that reach up to seven inches. If you want to cut with ease, you can use a pair of industrial scissors. The exterior must be strong enough to stand the force that you will exert but it must also be flexible enough to fit all the pins and open the lock. If you don’t have a ballpoint pen that is made of plastic, you can also use a recyclable one. The exterior must not be too thick so that it can be moved while it is inside the opening of the lock. The exterior must have the same diameter or it must be smaller than the opening of the lock. You need a ballpoint pen that can fit the tubular lock. If not, you can purchase at the store that is near you. You will need the items below to make a tubular lock bypass tool.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |